Rustic Painted Douglas Fir – Sample

Home / Rustic Painted Douglas Fir – Sample
reclaimed painted douglas fir

These old painted Douglas fir boards are prepared by removing any metal fixtures and nails and trimming the ends. These boards can have a variety of painted appearances, some of which are partially worn away,
revealing the lovely patina characteristic of aged Douglas fir. These are the perfect choice for anyone wanting a rustic, aged finish. The sides of the boards are left original and not machined.

 

Dimensions:

190mm – 250mm x 20mm

Lengths:

Long lengths, often 2 - 4.5m

Grades:

Reclaimed

  • Air Dried
  • Cladding
  • Original Edges
  • Reclaimed
  • Solid
This is a special order product, please contact us for samples.
Please note, not all combinations of construction & finish are always available

Painted Reclaimed Douglas Fir - Quote

Prime
Even Colour.Mainly clear boards. Occasional pencil knots up to 10mm diameter. No Splits or Sap permitted

Select
Minimal Colour Variation.Many clear boards. Occasional knots up to 20mm diameter. May be filled or fillable. Maximum average of 2 small knots per linear metre of board length. Pencil knots (<10mm) not limited.No Splits or Sap permitted.

Standard
Limited Minor Colour Variation permitted. Occasional clear boards. Knots up to 35mm diameter. May be filled or fillable. Maximum average of 3 knots per linear metre of board length. Occasional small stable end splits one end – length up to 50mm. Occasional sound hard sap up to 5% of face area of the board.

Character
Colour Variation permitted.Knots up to 60mm diameter. May be filled or fillable. Maximum average of 3 knots per linear metre of board length. Cracks in knots up to 100mm either end of knot. Occasional small stable end splits one end – length up to 100mm. Occasional sound hard sap up to 10% of face area of the board.

Rustic grade
Colour variation allowed. Unlimited knot size. Knots may be filled or fillable. Occasional small stable end splits one end – length up to 100mm. Occasional sound, hard sap up to
10% of face area of the board.